| Customization: | Available |
|---|---|
| Type: | Diffuse Reflection Type Photoelectric Sensor |
| Output Signal Type: | Switching Type |
|
Still deciding? Get samples of US$ 15/Piece
Request Sample
|
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
Specification of Ring Proximity Sensor:
| Product | Photoelectric Sensor | ||
| Model | QR Series | ||
| Type | Diffuse Reflective | Retro Reflective | Through-Beam |
| Detecting distance | 10cm, 40cm | 2M | 5M, 10M |
| Light source | 850nm infrared light | ||
| Operating voltage | DC12-24V+10%(Ripple P-P:10%Max) | ||
| Current consumption | 15mA Max | ||
| Load current | 100mA Max at DC 24V | ||
| Output type | N=NPN.NO N2=NPN.NC NC=NPN.NO.NC P=PNP.NO P2-PNP.NC PC=PNP.NO.NC | ||
| Protection ciruit | Reverse polarity protection and short circuit protection | ||
| Response time | 0.5ms Max | ||
| Insulation resistance | 20MΩmin.(DC500V) | ||
| Dielectric strength | AC1000V 60Hz for 60sec | ||
| Operating Temperature | -10°C~-+50°C(without icing or condensation) | ||
| Ambient humidity | 35%-85% RH Relative humidity | ||
| Storage temperarure | -20°C~+60°C(No freezing allowed ) | ||
| Storage humidity | 35%-95% | ||
| Protection degree | IP66 | ||
| Meterial | ABS | ||
| Wiring method | φ4×2M/3-wires,φ4×2M/2-wires,φ4×2M/4-wires | ||
| Weight | Approx.20g | ||
){kind=link}