Hongfei New Release 80 mm Distance Measurement Laser Sensor

• Customization: Available
• Type: Digital Laser Displacement Sensor
• Output Signal Type: Analog Type
• Production Process: Integration
• Material: Plastic
• Feature: Conductor
• IP Rating: IP56
• Certification: ISO
• Customized: Customized
• Production: Reverse Polarit Protection
• Response Time: 0.5ms Max
• Power Supply: 12-24VDC
• Output: Switching Transducer
• Transport Package: Carton
• Trademark: YaKeXi
• Origin: China
• HS Code: 9031809090
• Production Capacity: 500000/Month

Product Description

 

Product Description

HongFei New Release 80 mm Distance Measurement Laser Sensor 

Detailed Photos

Specification
 

Detection method		Diffuse reflection
High-functional mode		HFY6-30NP-S	HFWY6-50NP-S	HFWY6-80NP-S		HFWY6-120NP-S	HFWY6-250NP-S
Measurement center distance		30mm	50mm	85mm		120mm	250mm
Measurement range		30±4mm	50±10mm	85±20mm		120±60mm	250±150mm
Light receiving part		CMOS Image sensor
Resolution		0.5μm	1.5μm	2.5μm		8μm	20μm
Linearity		±0.1%F.S
Temperature characteristics		±0.08%F.S./ºC
Beam source		Red semiconductor laser level 2[JIS/IEC/GB/KS/FDA Laser Notice No.50/GB]Maximum output:0.39W,Peak wavelength of floodlight;655nm
Beam diameter(Note 2)		0.1x1mm	0.5x1mm	0.75x1.25mm		1.0x1.5mm	1.75x3.5mm
Supply power&valtage		24VDC±10%Impulse(P-P)0.5V(P-P)
Current consumption		100mA   Below
Response time		200μs,500μs,1ms,2ms
Analog Output	Voltage	Output range:0~10.5V(Normal),11V(Alarms)Output impedance:100Ω
	Current	Output range:3.2~20.8mA(Normal),21.6mA(Alarms)load impedance:Below 300Ω
OUT1 Output OUT2 Output OUT3 Output		When NPN action is set Peak in-flow current:50mA Applied voltage:3V~24V DC(Between Output-0V) ·Residual voltage:Below 2V (Current:50mA)  Leakage current:Below 0.1mA			When PNP action is set Max input current:50mA ·Residual voltage:Below 2.8V (Current:50mA) ·Leakage current:Below 0.1mA
Output operation		Open when the output is ON
Short-circuit protection		Equipped (automatic recovery type
NP switching input		When connected to OV:NPN open collector output operates When the power supply is 24V DC connected:PNP open collector output action
Timing input		When NPN action is set:Action when connected to OV or action during connection (varies depending on the setting) When PNP action is set:Action when external power supply+is connected or action during connection(varies depending on the setting)
Multiple input		Perform zero adjustment,reset,memory switching,teaching,saving,and laser control according to the input time When NPN action is set:according to the time of connecting 0V When setting PNP action:according to the time when external power supply +is connected
Communication interface (high-function  type)		RS-422 Or RS-485 Baud rate:9,600/19,200/38,400/115,200bps The data length is 8 bits,the end bit length is 1 bit,no parity check,yes BCC,data differentiation:CR
Indicator	Laser light warning	Green light-emitting diode lights up when the laser is emitting light
	Alarm indicator	Insufficientlightfromtheorangelight-emittingdiodepreventsmeasurement.
	Output indicator	Theyellowlight-emittingdiode(numberofdisplaylights:3)lightsupwhentheoutputisactivated
Digital display part		Red LED symbol and 5-digit display
Pollution degree		Below 2,000m
Environmenta Resistance	Protective structure	P67 (except connection part)
	Ambient temperature	-10~+45°C(be careful not to condense or freeze)when storing:-20~+60°ºC
	Ambient humidity	35~85%RH:35~85%RH storage:35~85%RH
	Ambient illumination	3,000Ex or less (light-receiving surface illumination with incandescent lamp)
	Insulation resistance	20MQ or more at DC250V Megger (between all terminals and shell)
	Withstand voltage	AC1,000V1 minute(between all terminals and case)
	Vibration resistant	Endurance frequency 10~55Hz(cycle 1 minute)Double amplitude 1.5mm in X,Y and Z directions for 2 hours each
	Shock proo	500m/s 3 times in X,Y,Z directions
Tightening torque		Below 0.8N-m
Shell material		Enclosure:PBT,Frontcover:Acrylic Cable:PVC

 

 

Size

Certifications

 

Packaging & Shipping

Shenzhen Hongfei Automation Technology Co., Ltd, founded in 2019, is located in Shenzhen, Guangdong Province, is an enterprise mainly engaged in the instrumentation manufacturing industry; General business items are: Industrial automation equipment, electronic equipment, electrical engineering technology research and development; Sales: Electrical machinery and equipment, hardware and electrical appliances, electronic components, electronic computers and accessories, communication equipment, instruments and meters, security monitoring products, Pneumatic and hydraulic devices, wire and cable, metal materials, office supplies; Industrial automation engineering design and construction; Import and export of goods and technology.Would like to bulid long term cooperation with you.

WorldWide Marketing